JPF-QC-AT 1½” – 2″ Automatic backwash protective filter (time controlled), according to EN 13443-1 and DIN 19628, for drinking water up to 30 °C, operating pressure range 1.5 – 16 bar, nominal flow rate 13 – 16 m³/h (at 0.2 bar pressure loss).
With stainless steel filter screen, time-controlled automatic backwash system, LCD display and safety module.
Thanks to JUDO QUICKSET-E, installation in horizontally and vertically running pipes possible.
against dirt entry
with automatic, time-controlled backwash and clear display
patented safety module for termination of the backwash process in case of power failure
screen cleaning through unique point rotation system
no interruption of the water supply during backwashing
avoids waste through filter cartridge change and water-saving due to an effective and short backwash
High-quality filter housing PN 16; built-in rotary flange with patented bayonet connection made of brass with screw connection (threaded connection according to EN 10226-1); horizontal or vertical installation possible; filter screen made of stainless steel; backwashing according to the highly effective point rotation system for optimum germ protection with simultaneous cleaning of the sight glass; with automatic backwashing system for triggering the operating and backwashing positions, plug-in power supply 230 V/50 Hz, patented safety module for closing the flushing valve in case of power failure, control via keypad and LCD display, time-controlled automatic backwashing system (adjustable from 4 hours to 50 days), manual triggering via key.
JUDO Safety block JSB 1½” – 2″
Pressure reducer with inlet and outlet pressure gauge and backflow preventer to extend a backwash protective filter to the domestic water station.
Order number 8105001
Order number |
Model |
---|---|
8020433 | JPF-QC-AT 1½" 100 µm (0,10 mm) |
8020434 | JPF-QC-AT 2" 100 µm (0,10 mm) |
8020438 | JPF-QC-AT 1½" 30 µm (0,03 mm) |
8020439 | JPF-QC-AT 2" 30 µm (0,03 mm) |
8020443 | JPF-QC-AT 1½" 320 µm (0,32 mm) |
8020444 | JPF-QC-AT 2" 320 µm (0,32 mm) |
8020448 | JPF-QC-AT 1½" 500 µm (0,50 mm) |
8020449 | JPF-QC-AT 2" 500 µm (0,50 mm) |
JUDO I/O cable set
For transmission of potential-free messages (suitable for PROFIMAT-QC-AT/-ATP ¾” – DN 100 and PROMIMAT-QC-AT 3/4″ – 1¼”).
Order number: 2021074