JRSF DN 125 – 200 Backwash protective filter, according to EN 13443-1 and DIN 19628, for drinking water up to 75 °C, operating pressure range 1.5 – 10 bar, nominal flow rate 75 – 170 m³/h (at 0.2 bar pressure loss).
Two filter chambers, each with a stainless steel filter insert and diverter flaps with hand lever for adjusting the operating and backwash positions.
against dirt ingress
very rapid and easy backwashing
without interruption of the water supply during backwashing
avoids waste by changing filter cartridges and is water-saving due to an effective and short backwashing process
housing made of high-quality cast iron
Housing made of welded steel PN 10, with flange connection according to EN 1092-1, corrosion-resistant plastic coating, sight glasses on both sides, two filter chambers with one permanent filter insert each, filter screen made of stainless steel, diverter flaps with hand lever for setting the operating and backwash positions, flushing valve, with two manometer connections ½”.
Silicone-free version on request.
Order number |
Model |
---|---|
8103035 | JRSF DN 125 100 µm (0,10 mm) |
8103036 | JRSF DN 150 100 µm (0,10 mm) |
8103037 | JRSF DN 200 100 µm (0,10 mm) |
8300002 | JRSF DN 125 30 µm (0,03 mm) |
8300012 | JRSF DN 150 30 µm (0,03 mm) |
8300022 | JRSF DN 200 30 µm (0,03 mm) |
8300006 | JRSF DN 125 320 µm (0,32 mm) |
8300016 | JRSF DN 150 320 µm (0,32 mm) |
8300026 | JRSF DN 200 320 µm (0,32 mm) |
8300007 | JRSF DN 125 500 µm (0,50 mm) |
8300017 | JRSF DN 150 500 µm (0,50 mm) |
8300027 | JRSF DN 200 500 µm (0,50 mm) |
8300008 | JRSF DN 125 1000 µm (1,00 mm) |
8300018 | JRSF DN 150 1000 µm (1,00 mm) |
8300028 | JRSF DN 200 1000 µm (1,00 mm) |